Showing posts with label Heartfelt Creations Celebrate the Seasons Gift Wrapped Present Stamp Set. Show all posts
Showing posts with label Heartfelt Creations Celebrate the Seasons Gift Wrapped Present Stamp Set. Show all posts
Saturday, December 16, 2017
Ornate Sleds
Creating an explosion card with the Heartfelt Creations sled, is only limited to your imagination. All you need to do is to learn the basics for this design and then fill up the spaces with your own inspirations and creativity! If you’ve never made 3D cards before, this is an excellent place to start. It looks time-consuming but after the first 3D card like this one, the next one is easier and faster to put together. You can use a ruler and scissor to cut your strips inside the sled and score the crease lines, or you can use a score board, whichever you prefer. Either way, the results will be a fantastic card for little effort! I’ve made a few pop up box cards using just a 12" x 12" cardstock but this sled with the pop up tree and presents is surprisingly simple to make and yet still rewardingly impressive to give to a loved one.
This sled is able to fold down just like any explosion card. Basically, I used the same technique for this card and created a tutorial on the measurements using this Heartfelt Creations Celebrate The Season Ornate Sled.
Instructions:
 |
Heartfelt Creations Celebrate The Season Ornate Sled |
Using the Heartfelt Creations Celebrate The Season Ornate Sled stamp and die set, emboss two sleds with NUVO Silver Moonlight Glitter embossing powder and die cut. I like using 110 lb weight cardstock for sturdiness for cards like this one. If you don't have this heavier weight of cardstock, cut out two extra sleds to glue behind the embossed sleds.
Cut out 10 poinsettia flowers and 4 holly leaves using the Heartfelt Creations Celebrate The Season Ornate Sled die set. I colored theses poinsettias and holly leaves with Copic Markers and used my fingers to pinch the center of each petal for the poinsettias and holly leaves. Glue two poinsettias together and apply glue to the center of each poinsettia and add US Artquest Mini Prills - You Had Me At Yellow. Glue the poinsettias with holly leaves on the sled.
Cut out the label "Enjoy"found in the Heartfelt Creations Celebrate The Season paper.
Tutorial For Support for Inside:
Fold left on one end and fold right on the other end of each strip. Glue or use 1/2" wide Scor Tape to each end of the strips.
I like folding the strips down first (photo below) and then apply adhesive such as glue or Scor Tape before sticking the last strip.
Step 2 Gluing Support to Sled: Adhere the inside support of the card to the sled using glue or two-side adhesive tape.
When the inside support is glued, the card will be able to fold down even after the toppers.
Step 3 Toppers: Stamps the presents using the Heartfelt Creations Celebrate The Season - Gift Wrapped Presents stamp set with Memento Tuxedo Black Ink and die cut using the die set. Color the presents with Copic Markers.
 |
| Heartfelt Creations Celebrate The Season Gift Wrapped Presents Stamp Set |
 |
| Heartfelt Creations Snow Kissed Spruce stamp |
Using dark green cardstock, stamp the medium sized pine tree using the Heartfelt Creations Snow Kissed Spruce stamp with Memento Tuxedo black ink and die cut using the Heartfelt Creations Snow Kissed Frolicky Frosty and Spruce die set. To attach the presents and tree to support frame on the inside of the sled, cut out 9 strips of white cardstock measuring 1/2" wide and 3" long. Depending on the size of each present, adhere the end of each strip behind the present and tree. Before permanently adhering each present and tree to the inside, I use double-side tape that isn't too sticky kept arranging the presents and tree to the support until I got the arrangement I wanted as well as making sure the card is still able to fold. When I was satisfied with the arrangement, I used permanent adhesive to the ends of the strip and glued each one to the support frame on the inside of the sled. I cut off any strip that extended below the support frame.
I hope you'll give this card a go. It might be a little bit of a challenge but it's definitely worth the effort.
 |
| Nancy Hill, Design Team for The Rubber Buggy |
Saturday, October 1, 2016
Deer Christmas Tree
Welcome back! Hi, I am Nancy and excited to share with you these three gorgeous supplies that The Rubber Buggy online store has for you to make this card.
Let's start with this gorgeous Tutti Design Vinery Christmas Tree die on this card. Isn't this die gorgeous. I cut out it out twice with the wonderful Bazzill green and red cardstock. The Rubber Buggy has a variety of color of this quality Bazzill cardstock in their store. I love not only the Bazzill card stock colors but the quality of weigh in this card stock. I just cut out the red deer and glue it on the green die cut and added some gold Ranger Ice Stickles on the bulbs.
Also, The Rubber Buggy has in stock for you four other gorgeous Tutti Designs Christmas Tree dies that would also look wonderful for your card. Fun! Fun! Fun!
So much to choose from and all of these dies would be a perfect for your Christmas cards this year.
This gorgeous card stock is called Pion Designs, Christmas in Norway, Santa is Coming.
These wonderful supplies were purchased at The Rubber Buggy on-line store. Now it is your turn to try these products out from The Rubber Buggy and see what you create!
Thank you again for visiting me today. I will be sharing with you next Saturday another exciting project or card made using the wonderful Rubber Buggy supplies.
Nancy Hill
Designer for The Rubber Buggy
Saturday, September 3, 2016
Country Christmas Wreath
I love making Christmas cards and this time I am trying something new by adding some Ranger distress inks and the gorgeous Art Alchemy acrylic paints to my dies and card stock from The Rubber Buggy store.
I made this country wreath with this shining candle using the Tutti Designs Shining Candle die with gold and white shimmer card stock papers. I added some Wild Orchid Craft poinsettias and glued gold berries in the middle. I added gold glitter holly leaves with some pine spray to this candle.
I cut out the oval frame using the Spellbinder Oval Nestabilities and covered it with aluminum foil. I painted the aluminum foil frame with the gorgeous Art Alchemy Metallique Steampunk Copper and Ranger Ripe Persimmons Distress ink.
I had a snowflake chip board and painted it with Art Alchemy Metallique Steampunk Copper with Art Alchemy Opal Magic Rose-Gold.
The gorgeous printed paper is from the Lemon Craft House of Roses. I just love this stunning vintage 6" x 6" paper pad that come with 12 designs. Also, The Rubber Buggy carries a variety of Bazzill solid color card stock that I used behind the front of the card.
The Merry Christmas is from the beautiful new released stamp set from the Heartfelt Creation Celebrate The Season. You can also purchase the die set for these stamps.
Remember to visit The Rubber Buggy store to shop for those gorgeous dies, stamp supplies and other supplies for all of your projects, scrap booking and card making. You will be excited to hop on over to The Rubber Buggy Blog and The Rubber Buggy Facebook each day to see what the talented and creative designers have made with products from The Rubber Buggy store.
Thank you again for visiting me today. I will be sharing with you next Saturday another exciting project or card made using the wonderful Rubber Buggy supplies.
Nancy Hill
Designer for The Rubber Buggy
Saturday, August 20, 2016
Christmas Snow Globe with Jolly Snowman
Welcome back and I am Nancy Hill, sharing with you every Saturday an exciting new die, stamp and supplies from the wonderful on-line store, The Rubber Buggy.
I made this step card using the two new releases from Tutti Designs - Snowglobe Expressions and the Jolly Snowman dies along with the gorgeous Poppy Stamp Die - Snowy Christmas and the new released stamp from Heartfelt Creations - Celebrate The Seasons - Gift Wrapped Present Stamp Set. Other supplies are Graphic 45 - Christmas Carol and Bazzill card stock.
I made this step card using the two new releases from Tutti Designs - Snowglobe Expressions and the Jolly Snowman dies along with the gorgeous Poppy Stamp Die - Snowy Christmas and the new released stamp from Heartfelt Creations - Celebrate The Seasons - Gift Wrapped Present Stamp Set. Other supplies are Graphic 45 - Christmas Carol and Bazzill card stock.
 |
| Tutti Designs Snowglobe Expression Tutti Designs Jolly Snowman |
 |
| Poppy Stamp Die - Snowy Merry Christmas Heartfelt Creations-Celebrate The Season - Gift Wrapped Present Stamp Set |
 |
| Inside of Card
I used the Tutti Designs Jolly Snowman along with the Heartfelt Creations-Celebrate The Season-Gift Wrapped Present stamp which was stamped using the Misti Stamp tool and embossed with silver embossing powder. For those that aren't familiar with the Misti Stamp tool, there are You-Tube video to get you started. I wasn't able to stamp well in the past until I invested in buying this valuable Misti Stamp tool that comes in 3 different sizes. Now, my stamping comes out well each time with this Misti Stamp tool from The Rubber Buggy.
This is called a step card and there are many tutorials on-line for cutting out a step card as well as step-card dies.
I always use Scor Tape to attach my bows and ribbons on my cards. In case I want to rearrange my bow, the Scor Tape remains sticky when I take the ribbons and bow off my card and reapply it to the Scor Tape..
Remember to visit The Rubber Buggy store to shop. You will be excited to hop on over to The Rubber Buggy Blog and The Rubber Buggy Facebook each day to see what the talented and creative designers have made with products from The Rubber Buggy store.
Thank you again for visiting me today. I will be sharing with you next Saturday another exciting project or card made using the wonderful Rubber Buggy supplies.
Nancy Hill
Designer for The Rubber Buggy
|
Subscribe to:
Posts
(Atom)
