Showing posts with label Misti. Show all posts
Showing posts with label Misti. Show all posts
Thursday, February 22, 2018

Simple Thank You Cards

Hi everyone, Steph Ackerman here today with a sweet something especially for you.  Please visit the store for all the fun products I've used today.  Thank you cards are always a must have for anyone so why not create some to have on hand so they are available when you need them. 



I've used the Poppystamps Craft Stamps - Hope and Thanks for both cards.


Using the Mini Misti by My Sweet Petunia, I was able to line up my stamps exactly where I wanted them using different colors of ink.  Once I was done, I realized I wanted more stamps and the Misti was perfect for lining them up too.  Then I used Spellbinders Circle and Scalloped Circle dies to die cut the panel.


My next card is quite simple, using left over scraps from Prima Rose Quartz paper pad.  Simply inking the edges of the panels brings this plain card to life.  Another sentiment from Poppystamps Craft Stamps - Hope and Thanks was stamped in the corner using Ranger Jet Black Ink.


So you've got two pretty cards that can be created quickly.

Thank you for visiting
Tuesday, February 7, 2017

Daffodil Tilda Finished Card


Hi Everyone it's Jennifer here with my finished
card from last week when we did the face tutorial.
The link for the face Tutorial is Here.
So I was going to make her into an Easle Card with lots of
layers and lace but then decided to take a step back and just
 do a CAS card and give her centre stage.
So I have cut a card base 23cmx15.5cm
lavered it in a piece of Bazzill to match my paper
11cmx15cm. Then the same Bazzill 14.5cmx7cm.
I then used Pion Sent Of Lavender
to highlight her 14cmx6.5cm. I then layered them
all up as in the picture. Now to do the frame I used the 
I am just in love with these. The holes around the edges 
are just so delicate I'm sure its going to get a good
 working out I can see. I used the second biggest and I then
cut 1cm in all around the inside with  my paper trimmer.
I then cut my Image to 7cmx10cm and  ran 3D Foam Tape
cut to fit around the bottom of the frame and then my Tilda.
I then used the 3D Foam Tape to layer her framed on the card.
I was going to do more but kept looking at her thinking
 she is just perfect all by herself.
Copics I used are
Face - E0000, E000, E00, E01, E11, E13, R21
Hair - E25, E30, E31, E33, Y21
Flowers Base - C0, C01
Outfit, Flower Tops - RV00, RV91, RV93, RV95, RV99



All these products and more are avaliable at the
The Rubber Buggy Shop and don't forget to visit us on Facebook  look for the Videos
down the side too, Instragram and the Rubber Buggy Design Team Blog
 where there's a post nearly everyday from one of the team.

Happy Crafting
Jennifer
Tuesday, January 31, 2017

Magnolia Tilda - Face Tutorial


Hi Everyone it's Jennifer here with a quick tutorial on how I colour my
Tilda's faces with lots of photo's as I have had a lot of requests.


First I stamp my Tilda today I used Daffodil Tilda 
I stamped her up with my Misti  using Memento Tuxedo Black Ink.
I have coloured her in Copics. So first I have roughly coloured her face 
in E0000.


Then I have started the highlights using E01 around her face.


Then straight over the top I used E11 as it makes the blending
of the dark colour easier and no lines left.


Then I blend out from the E11 using the E01.
See no lines.


Then I blend further into the centre of her face with the E00.
I also put a flick from one eye 3/4 of the way to the other eye.


I then come in even further with my E00 .


Then over the centre with the E0000.


I then repeat the process from the start as it gives her face lots 
of depth. So here I have gone around her face in the E11 I didn't
have to use the E01 again there as I already had ink laid
 down so it would blend easily.


Next I used the E01. you can see her face getting darker.


Then the E00 bringing it closer again to the centre. 


 Then I used E0000 over the whole lot.


Now to do the cheeks I usually use R20 but mine just decided to run
out and I had to use R21. Now to do them I do 3 small circles
 around the dots on the cheeks as in the first cheek. I keep doing that 
until they connect like on the second pic.

I then go over the cheeks with E000 and then the 
whole bottom half of her face with E0000 to smooth all the lines

I always add the 3 white dots to her cheeks.


There you go all done dont forget she will fade a
bit as she dries.

A dry face.
Ooooh just spied New Releases of Magnolia's.
Click the link.

All these products and more are avaliable at the
The Rubber Buggy Shop and don't forget to visit us on Facebook  look for the Videos
down the side too, Instragram and the Rubber Buggy Design Team Blog
 where there's a post nearly everyday from one of the team.

Happy Crafting
Jennifer
Sunday, August 14, 2016

Farrah Loves Flashdance

 
Hi Everyone it's Jennifer here with  a Sweet Card
I Created for my Daughters Girlfriend
turning 18. I thought this Gorgeous Stamp from 
Stamping Bella Uptown Girls - Farrah Loves Flashdance
would be just perfect!

I have used the Sentiment Stamp from another  
as it had the perfect sentiment.
The  White Venice Lace -Bow Lace you will notice is white so I
used my Black 100 Copic to turn it Black.
The pearls I coloured in with  the Pink Copic.
The flowers are a mix from Wild Orchid Flowers  and I have edged
all my papers in Lawn Fawn Mermaid Ink.

All these products can be found at  the 
The Rubber Buggy Shop and dont forget to visit us on Facebook  look for the Videos
down thew side too, Instragram and the Rubber Buggy Design Team Blog
 where there's a post nearly everyday from one of the team.

A List of all the Goodies I have used and quick links :)


Happy Crafting Everyone

Jennifer
Tuesday, July 19, 2016

Stamping Bella Tutorial

                                       

 Hi it`s Jennifer here with a tutorial on how I create my Stamping Bella Cards.
First I coloured my Image up and then picked some of the colours she was wearing.
I  then picked the ink colours for the background and sequins to match.


I have used The Lawn Fawn Scalloped Rectangle Stackleables the Second
biggest and 4th biggest to cut a Frame.

   So it then makes this Gorgeous Frame.


I have then cut one White Card stock and one Accitate to 9.5 x 12.5cm


The Card base is  23.5 x 15cm asnd scored down the centre.


 On the White card stock I  sponged  the  3 matching distressed ink colours.
 I used Tumbled Glass, Picked Raspberry and  Scattered Straw.
 I  flicked water on the inked Card stock and  patted it of with paper towel to lift the ink off.


 I then flicked with a brush the 3 ink colours and sprayed it with perfect pearls for sparkle.
Very hard to see though.


 I taped the accitate to the frame


 I taped doublesided foam tape all the way around leaving no gaps
so the sequins cann't get out. I also ran a powder tool around the inside
edges of the foam tape so the sequins don't stick.


 I then stamped the sentiment on the inked paper.
I  taped  the  Inked paper to the back of the Shaker 
Ooops I nearly forgot I added a piece of Aqua Cardstock 
14.5 x 11.5 under the Shaker section and taped it to
 the card base and added my Image using dimensionables.


The colours were not very photogenic as they were softer and bright.
Hope you enjoyed this tutorial and cann't wait to see yours. 

Copics  used
E0000, E000, E00, E01, E11, E33, E50, E51, E55, E57
Y15, Y18, Y21
YR23
BG10, BG11, BG15, BG49
RV02, RV04, RV06
C03, C05, C07
YG11, 
G21, G63

Happy Crafting 

Jennifer





Total Pageviews

Related Posts Plugin for WordPress, Blogger...

Powered by Blogger.