Showing posts with label Poppy Stamps Die. Show all posts
Showing posts with label Poppy Stamps Die. Show all posts
Thursday, September 23, 2021
Stained Glass Poinsettia
Hi everyone, Steph Ackerman here today with lots of fun products from the store.
This Poppystamps Stained Glass Poinsettia die allows you many options to create.
Using assorted Distress Oxide Inks in Squeezed Lemonade, Brushed Corduroy, Abandoned Coral and Mowed Lawn - I created the first background.
Using Tim Holtz Idea-ology Kraft Cardstock, I die cut the poinsettia and placed it over the inked background.
The panel was then die cut using Lawn Fawn Stitched Rectangle dies, then added to another panel of Ranger Kraft Cardstock. The left over inked panel panel was added to a black card.
I used the die again with Ranger Kraft Cardstock and adhered it to green cardstock.
I die cut the poinsettia a second time and filled in the petals. The 5 prominent petals were added to the panel with Scrapbook Adhesives 3D Foam Adhesives for dimension.
The panel was matted on brown cardstock, then onto a torn panel from the Simple Stories Simple Vintage Farmhouse Garden paper pad, then finally onto Ranger Kraft Cardstock before being added to the card.
Finally I die cut Lawn Fawn Border Line Dies - Happy Holidays and Merry Christmas - and adhered them to each card.
Thank you for visiting
Thursday, April 30, 2020
Sweet Fairy Cards with Poppystamps
Hi everyone, Steph Ackerman here today with lots of fun products from the store. Please visit the store for all the fun products I've used today.
Use Scor-Pal to create 2 cards from Bazzill Licorice Twist cardstock. I used Authentique's Romance 6" x 6" paper pad to create the layers on my cards.
Cut the base layers slightly smaller than the cards and adhere. The top 2 layers were die cut with Lawn Fawn Stitched Rectangle dies. Each panel was wrapped with pink ribbon before being added to the cards.
The fairies were die cut from the same paper pad using the Poppystamps Craft Die - Nimble Faerie. She was mounted on Bazzill Licorice Twist cardstock which was die cut with Lawn Fawn Small Stitched 4 Bar Rectangles. It was added to the card with Scrapbook Adhesives 3D Foam Squares.
The phrases are from Stamperia's Fly High stamp set, stamped with Memento Tuxedo Black Ink on scraps from the Authentique paper pad, matted with Licorice Twist and added to the cards.
Thank you for visiting
Use Scor-Pal to create 2 cards from Bazzill Licorice Twist cardstock. I used Authentique's Romance 6" x 6" paper pad to create the layers on my cards.
Cut the base layers slightly smaller than the cards and adhere. The top 2 layers were die cut with Lawn Fawn Stitched Rectangle dies. Each panel was wrapped with pink ribbon before being added to the cards.
The phrases are from Stamperia's Fly High stamp set, stamped with Memento Tuxedo Black Ink on scraps from the Authentique paper pad, matted with Licorice Twist and added to the cards.
Thank you for visiting
Thursday, November 14, 2019
Merry Christmas Cards with Memory Box
Hi everyone, Steph Ackerman here today with lots of fun products from the store. Please visit the store for all the fun products I've used today.
I've used the Memory Box - Open Studio - Distressed Baptisia Collage, which is a collection of 4 different dies, along with the Graphic 45 Joy to the World Collection to create Christmas cards.
My first card is horizontal and the dies were used in 2 opposite corners. Papers from the Joy to the World collection were added to both the inside and outside of the card.
This vertical card uses one of the other Memory Box dies in one corner. Assorted tags from the Graphic 45 paper collection were added to the front of the card.
Thank you for visiting
I've used the Memory Box - Open Studio - Distressed Baptisia Collage, which is a collection of 4 different dies, along with the Graphic 45 Joy to the World Collection to create Christmas cards.
My first card is horizontal and the dies were used in 2 opposite corners. Papers from the Joy to the World collection were added to both the inside and outside of the card.
Inside, pattern paper was added to both sides and you can see the design peeking out behind the die. Lawn Fawn's Outside In Stitched Rectangle dies were used on Bazzill Marshmallow and Lollipop cardstocks.
My final card uses yet another die. A torn paper panel and a post card from the Graphic 45 collection were added on top. Ranger Liquid Pearls were added around the card for dimension.
Inside I also used Lawn Fawn's Outside In Stitched Rectangle dies with Bazzill Marshmallow and Lollipop cardstocks.
Tuesday, June 18, 2019
Christmas Bauble
Hi it's Jennifer here and
I thought it was time to do a couple of Christmas Cards
as I don't like leaving them until the last minute to create
and write in.
So today I used the Lavina Die to die cut out from the
Lawn Fawn Stitched Rectangle that it just fits in. I only popped
out the little pieces of the ornaments and the centre of the Bauble.
I then cut a piece of acetate and glued it on the back of the stitched
rectangle and glued back in the Bauble and Snow Flakes. I then
cut another Bauble and Snow Flake out and layered it on top. I
then did it again but used Silver Glitter Paper.
For the background I cut a White Cardstock base 23.6cm x 15 cm
and then layered it with Silver Glitter Paper - 14.5cm x 11.8 cm.
Next I die cut the Lawn Fawn - Fancy Lattice Backdrop die out.
My most favorite die at the momment. Now I only popped out
the bits around the edges and glued the back off it and then down
onto the glitter. Next I used 3D Tape and Sequins and created
a shaker. Card complete after I sprinkled a couple of sequins around.
Poppy Stamps - Lavinia
Lawn Fawn Stitched Rectangles
Bazzill
I thought it was time to do a couple of Christmas Cards
as I don't like leaving them until the last minute to create
and write in.
So today I used the Lavina Die to die cut out from the
Lawn Fawn Stitched Rectangle that it just fits in. I only popped
out the little pieces of the ornaments and the centre of the Bauble.
I then cut a piece of acetate and glued it on the back of the stitched
rectangle and glued back in the Bauble and Snow Flakes. I then
cut another Bauble and Snow Flake out and layered it on top. I
then did it again but used Silver Glitter Paper.
For the background I cut a White Cardstock base 23.6cm x 15 cm
and then layered it with Silver Glitter Paper - 14.5cm x 11.8 cm.
Next I die cut the Lawn Fawn - Fancy Lattice Backdrop die out.
My most favorite die at the momment. Now I only popped out
the bits around the edges and glued the back off it and then down
onto the glitter. Next I used 3D Tape and Sequins and created
a shaker. Card complete after I sprinkled a couple of sequins around.
Poppy Stamps - Lavinia
Lawn Fawn Stitched Rectangles
Bazzill
I hope you all have a Great Crafting Week
Jennifer
Tuesday, July 3, 2018
Happy Birthday Audrey
Hi it's Jennifer here and I needed an elegant Birthday Card.
So I have used Audrey Loves Makeup in some bright
pink and black. I have
Stamped and Fussy Cut Audrey and used 3D tape to raiser her on
the largest Lawn Fawn 4 Bar Stitched Rectangle.
I have also Used the Poppy Stamps
Happy Birthday Bold Die and did a partcial Die Cut
to just get the Birthday. Underneath the Birthday Die Cut
I have Bright Pink Sequins as it is a Shaker Card. I have
Copics
Skin - E0000, E000, E00, E01, E11, R20
Dress - C05, C07, C09
Shoes, Bag, Trims - RV02, RV04, RV06, RV09
Bazzill
I Hope you enjoyed this Card and hope
you all have a Great Crafting Week.
Jennifer
Tuesday, March 6, 2018
Birthday Butterflies
Hi it's Jennifer here with a Birthday Butterfly Card
I Die Cut The Happy Birthday and created it as a Shaker.
I created a a white base 15cm square layered Mauve
and Aqua Bazzil on it. The next white layer I cut a 13.5cm
square then I measured 1cm in one corner both sides and 2cm
on the opposite both sides and cut it out. I then cut another square
13.5cm square on white card stock I smooshed ink all over it
using Wilted Violet, Picked Raspberry and Lagoon Blue.
I sprayed it with a Perfect Pearls Mix so it glittered. I measured
from the corner both ways 2cm and opposite 3cm. I raised
the cutout white pieces and the strip of inked I taped flat. The
Butterflies I cut out of the scraps of inked paper and some white.
I did layer a couple and glued some random sequins on the card.
I also popped a pearl in the centre of the Butterflies.
Hope you enjoyed this quick and easy Card
and have a Great Crafting Week.
Tuesday, February 27, 2018
Lolly and her Brolly
Hi it's Jennifer again I am back with a Sweet Little Card
using Stamping Bella Lolly has a Brolly. I have coloured her up
in Copics.
Colours
Face - E0000, E000, E00, E01, E11, R20
Coat, Trims,Boots - RV000, RV04, RV04, RV06
Umbrella, Boots, Flower - V000, V01, V12, V15
Pot - E08, E09, E33
Leaves - YG23, YG17, YG61
Now by accident I discovered another way to use this
leaving the top connected and still did a shaker card with the
sequins underneath. It looks so effective. I also scattered a few sequins
around the top of the card. I layered a LF Small Stitched Rectangle
and a Large LF Large Stitched Rectangle on top of
LF Outside In Stitched Scalloped Rectangle on a White Card Base.
I hope you enjoyed this Card and have a Great Crafting Week
Look forward to you visiting me here next week.
Subscribe to:
Posts
(Atom)
