Showing posts with label Stamperia. Show all posts
Showing posts with label Stamperia. Show all posts
Thursday, December 22, 2022
Merry Christmas
Hi everyone I figured a final Christmas to close out 2022 would be appropriate for todays post.
So I created a slimline shaker using Stamperia “Cozy Winter” collection.
I used a slimline frame surrounded by leaves and colored the leaves using COPIC markers to match the shades in the collection
Next I took a piece of acetate and glued the frame to it so I could create a shaker card
I then added some glitter which has a look of snow to it perfect for the season right?! 🥰
Then I covered it with the slimline frame so I could decorate the front. I diecut elements from the paper collection
Popped on a sentiment from the Laserowe collection “Winter Tales” and added some chipboard pieces to finish it off
I hope everyone enjoyed the holidays and well soon we shall bye 2022 and welcome 2023 stay tuned for what’s in store…
Thursday, January 14, 2021
Winter Magic with Stamperia
Hi everyone, Steph Ackerman here today with lots of fun products from the store. Please visit the store for all the fun products I've used today.
With the Winter season here, I've used Stamperia Decorative Chips - Magic Winter Tales to showcase on my card.
I created the card using Bazzill Lollipop Cardstock, Bazzill Licorice Twist Cardstock which had been die cut with Lawn Fawn Stitched Windy Backdrop Die and Craft O'Clock's Hazy Street collection. Several tags were cut from the paper collection and added to the card. Winter Magic was then adhered to the tags. The snowflake and poinsettia was added to 2 layers created from Bazzill Cardstock and Lawn Fawn Large Stitched Circle Dies.
Inside the card I added a panel of Bazzill Licorice Twist Cardstock and a panel from Hazy Street, both of which had been die cut with Lawn Fawn Large Stitched 4 Bar Rectangle Dies. Happy Holidays is a Lawn Fawn Border Line Die which was die cut from Bazzill Licorice Twist Cardstock and adhered to the card with Art Institute Clear Adhesive.
Thank you for visiting
Thursday, October 1, 2020
Stamperia Friendship Card
Hi everyone, Steph Ackerman here today with lots of fun products from the store. Please visit the store for all the fun products I've used today.
I'm using Stamperia Decorative Chips - Garland with Birds. I used Copic Markers to color the decorative chip. Using Lawn Fawn Large Stitched Circle Die, I die cut Bazzill Candy Bar Cardstock to use under the decorative chip. I adhered the chip to the circle with Art Institute Clear Adhesive.
To add dimension, I used Ranger Liquid Pearls in Raspberry or the berries and to fill in some of the flowers, along with Copper. I also use Nuvo Crystal Drops to fill in several other flowers.
I created an easel card from Bazzill Candy Bar Cardstock and Craft O'Clock's Hazy Street pattern papers. Stamping a phrase from Art Impressions with Lawn Fawn Black Licorice Ink, I die it with Lawn Fawn Small Stitched Circle Die and matted with a larger die before adding it to the card with Glue Dots. This helps the easel stand upright.
Thank you for visiting
Thursday, September 10, 2020
Stamperia Designed Cards
Hi everyone, Steph Ackerman here today with lots of fun products from the store. Please visit the store for all the fun products I've used today.
Thank you for visiting
Stamperia has a line of decorative chips that can be used for assorted projects. I've used the Rose and Butterfly chips to create my cards today.
Start by inking the leaves and flowers with Copic Markers. Then lightly ink the lattice panel with Tim Holtz Squeezed Lemonade Ink. Use Tattered Lace Detail Glue to adhere the panel to the card base.
Using Liquid Pearls in Dazzle and Garnet, fill in the roses. Use Liquid Pearls in Electric to fill in the leaves. Place aside to dry. Once dry, I added some more liquid pearls to fill in the cavities.
Along the right side of the card, add a strip of Bazzill Gumdrop Cardstock. Ink the Stamperia Butterflies with Tim Holtz Tattered Rose Ink and adhere just the bodies to the cards, leaving the wings free. Hello Friend, from the Memory Box Bird Sanctuary Clear Stamp set was stamped on Marshmallow Cardstock with Lawn Fawn Black Licorice Ink, die cut and matted with Gumdrop Cardstock. It was added to the card with Scrapbook Adhesives for dimension.
For my second card, I chose to ink the roses with Tim Holtz Tattered Rose and Fired Brick Inks. The leaves were inked with Bundled Sage Ink.
Using Maja Designs Shades of Sweet Coral, Tear the panel and ink with Fired Brick before adhering to the card. Stamp the dots in Black Licorice Ink using a stamp from the Bird Sanctuary collection. Also stamp Hello friend on a scrap of the Coral paper. Assemble the card and adhere the roses and leaves. Place the sentiment across the bottom edge and place one of the left over leaves on the strip.
Thursday, June 11, 2020
Pretty in Purple Cards
Hi everyone, Steph Ackerman here today with lots of fun products from the store. Please visit the store for all the fun products I've used today.
Starting with the Prima Marketing Open Flower die, I decided to build 2 cards around it. Since it is an open flower, there is no backing, so to achieve the look I wanted, I die cut the flower from 3 layers of Pion Design's Purple cardstock in one pass and 3 layers of Pion Design's Lavender cardstock in one pass. Pulling off the top 2 layers, the third layer shows the impression of the die and remains intact.
Using the intact layer for the flower bases, I reassembled the flowers using Tattered Lace Detail Glue, adding the purple insets to the lavender layer and the lavender insets to the purple layer. Then I adhered the top layer, gluing just the center of the flower, leaving the edges free.
Thank you for visiting
Starting with the Prima Marketing Open Flower die, I decided to build 2 cards around it. Since it is an open flower, there is no backing, so to achieve the look I wanted, I die cut the flower from 3 layers of Pion Design's Purple cardstock in one pass and 3 layers of Pion Design's Lavender cardstock in one pass. Pulling off the top 2 layers, the third layer shows the impression of the die and remains intact.
Using the intact layer for the flower bases, I reassembled the flowers using Tattered Lace Detail Glue, adding the purple insets to the lavender layer and the lavender insets to the purple layer. Then I adhered the top layer, gluing just the center of the flower, leaving the edges free.
Create a card from purple cardstock. Using Lawn Fawn Stitched Rectangle dies, die cut Bazzill Marshmallow Cardstock. Assemble the card by adding a lavender layer behind the rectangle.
Using Heartfelt Creations Classic Rose dies and coordinating stamps, create 4 sets of leaves on Bazzill Gumdrop Cardstock using Lawn Fawn Walnut Ink. Place 2 sets of leaves along the bottom of the card.
Add a brad to the flower center and place the flower on top of the leaves.
Finish the card by stamping a stamp from Stamperia's Enjoy stamp set, stamp it on Marshallow Cardstock and die cut with a Tutti Designs Nesting Oval die. Die cut a larger purple oval and slip it behind the leaves. Add to the card with Scrapbook Adhesives.
Alternate the colors for the 2nd card and adhere 2 sets of leaves in the upper corner. Again, add a brad to the flower center and place it on top of the leaves.
Stamp and die cut the same sentiment, adding it to the card with Scrapbook Adhesives.
Thank you for visiting
Thursday, May 14, 2020
Stamperia Enjoy Cards
Hi everyone, Steph Ackerman here today with lots of fun products from the store. Please visit the store for all the fun products I've used today.
Sprinkle Stamperia Glamour Pigments in Gold and Ancient Pink on Strathmore Watercolor Paper then spritz with water and let the colors mix. Rotate the papers so the colors run. Spritz more water as needed then heat set.
Mat each panel with Bazzill Gold Coins Cardstock then wrap with assorted ribbons and twine.
Create a pink card for card #1 and adhere the ribbon wrapped panel. Stamp the rose and pot using Stamperia Rubber Stamps using Memento Tuxedo Black Ink on Bazzill Marshmallow Cardstock. Color with Copic Markers. Die cut using Lawn Fawn Stitched Circle Dies. Mat with Lawn Fawn Zig Zag Circle Dies. Add the image on the card with Scrapbook Adhesives 3D Foam Adhesives for dimension.
Mask the word Enjoy from the same stamp set and ink with Memento Tuxedo Black Ink. Mat and add to the edge of the card.
Create a 2nd pink card and adhere the 2nd panel. Use the same rose and pot, stamp on Bazzill Marshmallow Cardstock, color with Copic Markers, then cut the edge of the stamped image. Mat with a Zig Zag die and cut off the edge. Add to the card with Scrapbook Adhesives 3D foam adhesives for dimension. Stamp Enjoy as above and add to the corner of the card.
Tie twine to the ribbon and add Enjoy to the corner. Add a little bit of glimmer to the rose using Ranger Ice Stickles.
Thank you for visiting
Thursday, April 30, 2020
Sweet Fairy Cards with Poppystamps
Hi everyone, Steph Ackerman here today with lots of fun products from the store. Please visit the store for all the fun products I've used today.
Use Scor-Pal to create 2 cards from Bazzill Licorice Twist cardstock. I used Authentique's Romance 6" x 6" paper pad to create the layers on my cards.
Cut the base layers slightly smaller than the cards and adhere. The top 2 layers were die cut with Lawn Fawn Stitched Rectangle dies. Each panel was wrapped with pink ribbon before being added to the cards.
The fairies were die cut from the same paper pad using the Poppystamps Craft Die - Nimble Faerie. She was mounted on Bazzill Licorice Twist cardstock which was die cut with Lawn Fawn Small Stitched 4 Bar Rectangles. It was added to the card with Scrapbook Adhesives 3D Foam Squares.
The phrases are from Stamperia's Fly High stamp set, stamped with Memento Tuxedo Black Ink on scraps from the Authentique paper pad, matted with Licorice Twist and added to the cards.
Thank you for visiting
Use Scor-Pal to create 2 cards from Bazzill Licorice Twist cardstock. I used Authentique's Romance 6" x 6" paper pad to create the layers on my cards.
Cut the base layers slightly smaller than the cards and adhere. The top 2 layers were die cut with Lawn Fawn Stitched Rectangle dies. Each panel was wrapped with pink ribbon before being added to the cards.
The phrases are from Stamperia's Fly High stamp set, stamped with Memento Tuxedo Black Ink on scraps from the Authentique paper pad, matted with Licorice Twist and added to the cards.
Thank you for visiting
Thursday, March 26, 2020
Beautiful Dress cards with Stamperia stamps
Hi everyone, Steph Ackerman here today with lots of fun products from the store. Please visit the store for all the fun products I've used today.
Once fussy cut, each piece was inked with Tea Dye Distress Ink using a Ranger Ink Blending Tool, then reassembled on the base image.
The pattern paper layer was added atop a Bazzill Butter Mint cardstock layer then added to the card base. The next layers were die cut using Lawn Fawn Stitched Rectangle Dies. The dress was added to the card with Scrapbook Adhesives 3D Foam Adhesives and the phrase slipped behind it.
My next card was created from Bazzill Candy Bar cardstock. The pattern paper layer was die cut with Lawn Fawn Stitched Circle Dies, added to a floral pattern paper, then added to the card. The dress was then added with Scrapbook Adhesives 3D Foam Adhesives and the phrase slipped behind it. Around the circle I added drops of Ranger Liquid Pearls.
Thank you for visiting.
Thursday, January 30, 2020
Travel Cards with Stamperia Around the World
Hi everyone, Steph Ackerman here today with lots of fun products from the store. Please visit the store for all the fun products I've used today.
Thank you for visiting
Using the Sizzix Planks die, die cut Sizzix Mat Board. Place a stencil on each plank then ink with Ranger Distress Ink - Walnut Stain.
Using papers from Stamperia's Around the World paper collection, create the cards. Use Lawn Fawn Stitched Rectangle dies to die cut each main layer.
Mat each layer with cardstock. Tear ticket pieces from the same paper collection, ink with brown ink and mat with cardstock.
Determine their placement, then add the mat board pieces on each card. Vary the placement on each card for a different effect.
Die cut the words using Sizzix Shadow Scrip #3 from brown and cream cardstocks. Adhere them together using Tattered Lace Detail Adhesive and add to each card as shown.
Thank you for visiting
Subscribe to:
Posts
(Atom)
